Dynamic Random-Access Memory (DRAM) stores data using charge stored in capacitors for memory applications. It is a type of volatile memory that is commonly used in computers, smartphones, and other electronic devices to temporarily hold data that the CPU needs to access quickly. Let's break down how DRAM works:
Capacitors: DRAM memory cells are comprised of capacitors and transistors. Capacitors are electronic components that can store electrical charge. They consist of two conductive plates separated by an insulating material (dielectric). When a voltage is applied across the capacitor, it charges the plates, and the amount of charge stored is proportional to the voltage applied.
Memory Cell Structure: Each DRAM memory cell consists of one capacitor and one access transistor. The capacitor represents a single bit of data (either a 0 or a 1). The access transistor acts as a switch that controls the flow of charge to and from the capacitor.
Storing Data: To store data in a DRAM cell, the memory controller applies a specific voltage to the capacitor using the access transistor. If a "1" is to be stored, the controller charges the capacitor to a particular voltage level, representing a logic high. If a "0" is to be stored, the capacitor remains uncharged or discharged, representing a logic low.
Refreshing: DRAM is called "dynamic" because the charge in the capacitors gradually leaks away due to the properties of the insulating dielectric. Therefore, the data stored in DRAM cells needs to be periodically refreshed to maintain its integrity. The memory controller reads the data from each memory cell and rewrites it back into the same cell to restore the charge level.
Accessing Data: When the CPU or other parts of the system need to read or write data to a specific location in DRAM, the memory controller activates the appropriate row and column in the memory array. The access transistor for that cell allows the charge from the capacitor to flow onto a bitline, which is then sensed and amplified to determine the stored value (0 or 1) during a read operation. During a write operation, the memory controller applies the required voltage to the capacitor through the access transistor, updating its stored value.
Array Organization: DRAM memory cells are organized into a two-dimensional array of rows and columns. Each row, also known as a wordline, connects to the access transistors of multiple memory cells. Each column, also known as a bitline, connects to the other side of the capacitors, allowing for efficient reading and writing of data.
It's important to note that DRAM is volatile memory, meaning it requires a continuous power supply to retain data. When power is removed, the charge in the capacitors dissipates, and the data is lost. This is in contrast to non-volatile memory like Solid State Drives (SSDs) or Hard Disk Drives (HDDs), which can retain data even without power. However, DRAM's volatility allows for fast access times, making it ideal for temporary storage of data that needs to be accessed quickly by the CPU.