In pulse-width modulation (PWM) circuits, the duty cycle is a crucial parameter that determines the percentage of time a signal remains in its high state compared to its low state during one complete cycle. PWM is a common technique used to control the average power delivered to a load without changing the supply voltage. It finds widespread applications in various fields, such as motor control, LED brightness adjustment, and communication systems.
The basic idea behind PWM is to switch a signal (usually a square wave) between two states: high and low, with a fixed period (T). The duty cycle (D) is then defined as the ratio of the time the signal remains in its high state (T_high) to the total period (T).
Duty Cycle (D) = (T_high / T) * 100%
The duty cycle value lies between 0% and 100%. Let's see how different duty cycle values affect the output of a PWM circuit:
Duty Cycle = 0%: In this case, the signal remains low for the entire period, meaning the output is always off (0% power).
Duty Cycle = 100%: Here, the signal remains high for the entire period, resulting in a constant output of maximum power (100% power).
Duty Cycle = 50%: The signal spends an equal amount of time high and low during each cycle, resulting in an average power output of 50%.
Duty Cycle < 50%: The signal spends more time in the low state than the high state, resulting in an average power output lower than 50%.
Duty Cycle > 50%: The signal spends more time in the high state than the low state, resulting in an average power output higher than 50%.
By varying the duty cycle, you can effectively control the average power delivered to the load. For example, in motor control, increasing the duty cycle will increase the average voltage applied to the motor, making it run faster. Decreasing the duty cycle will have the opposite effect, causing the motor to slow down.
PWM allows for efficient power control because the power loss in the switching elements (e.g., transistors) is relatively small, and the output power is adjusted by varying the duty cycle rather than altering the supply voltage. This makes PWM an effective and widely used method in electronic systems where precise control over power delivery is essential.