A current mirror circuit is an electronic circuit that is used to replicate or mirror the current flowing through one active device (usually a transistor) and generate an identical or proportional current in another transistor. This technique is commonly used in integrated circuits and other electronic systems for various applications, including current regulation.
The basic operation of a simple current mirror circuit is as follows:
Basic Current Mirror Circuit Setup:
The circuit consists of two transistors, commonly referred to as the "input transistor" and the "output transistor." The input transistor is used to set the reference current, and the goal is to force the output transistor to replicate this current.
Biasing the Input Transistor:
The input transistor is typically operated in the active region, where it is biased with a constant voltage across its base-emitter junction. This biasing establishes a fixed collector current (I_in) proportional to the voltage across the base-emitter junction and the transistor's characteristics.
Output Transistor Current Replication:
The current mirror circuit is designed such that the collector of the output transistor is connected to the collector of the input transistor. As a result, the output transistor attempts to draw a current (I_out) equal to the current flowing through the input transistor (I_in).
Matching Transistor Pair:
For an ideal current mirror, the two transistors should be precisely matched, with identical physical characteristics and operating parameters (e.g., same transistor type, size, temperature, etc.). In practice, manufacturers use well-matched transistors or even integrated devices on the same chip to ensure a close match.
Current Regulation:
The current mirror circuit is utilized in various applications where precise current regulation is required. By setting the reference current (I_in) using the input transistor, the output transistor will attempt to mirror this current. Any changes in the input transistor's current will be accurately replicated by the output transistor, provided the transistors are well-matched and operating within their specified range.
Use in Current Regulation:
Current mirror circuits find extensive use in electronic circuits for current regulation purposes. Here's how it is employed for current regulation:
Biasing Circuits:
Current mirrors are used in biasing circuits to establish a stable current reference. This reference current can then be used to bias other active devices, such as amplifiers, to operate in their linear and stable regions.
Current Sources and Sinks:
Current mirrors are used to create precise current sources or current sinks. By controlling the input transistor's bias current, the output transistor generates a regulated current, which is used in various circuit blocks like differential amplifiers, constant current loads, and current-mode logic circuits.
Temperature Compensation:
In some applications, current mirrors can be employed to compensate for temperature variations. By using transistors with temperature-dependent characteristics, the current mirror can adjust the output current to maintain a relatively stable value even in varying temperature conditions.
Analog and Mixed-Signal Circuits:
Current mirrors are extensively used in analog and mixed-signal integrated circuits, such as operational amplifiers, data converters, and voltage regulators, to achieve accurate and stable current regulation.
Overall, current mirror circuits play a crucial role in electronic design, enabling precise and consistent current regulation, which is vital for many applications that require reliable and predictable performance.