Power system islanding is a condition that occurs when a portion of the electrical distribution system becomes isolated from the main power grid but continues to operate independently. Islanding can pose serious safety hazards for utility workers and the general public, and it can also lead to equipment damage. To prevent islanding, anti-islanding protection techniques are employed. These techniques ensure that distributed generation sources, such as solar photovoltaic (PV) systems and wind turbines, disconnect from the grid when an islanding condition is detected. Here are some commonly used anti-islanding protection techniques:
Over/Under Frequency Protection: This technique monitors the system frequency, and if it deviates beyond predetermined thresholds (e.g., frequency falling below a minimum or exceeding a maximum value), the distributed generation source disconnects from the grid.
Over/Under Voltage Protection: Similar to frequency protection, voltage protection monitors the system voltage, and when it goes outside predefined limits (e.g., voltage falling below a minimum or exceeding a maximum value), the distributed generation source disconnects.
Rate of Change of Frequency (ROCOF) Protection: ROCOF protection measures how quickly the system frequency is changing. A rapid rate of change of frequency indicates a grid disconnection, and the distributed generation source responds by disconnecting from the grid.
Displacement Power Factor Protection: This technique monitors the power factor between the distributed generation source and the grid. A significant change in power factor can signal an islanding condition, prompting the distributed generation source to disconnect.
Impedance-based Protection: Impedance protection measures the impedance between the distributed generation source and the grid. If the impedance changes significantly, indicating grid disconnection, the distributed generation source disconnects.
Frequency Deviation Shift: This technique involves shifting the frequency setpoints of relays based on system loading conditions, to ensure that islanding detection is not solely dependent on fixed frequency thresholds.
Communication-Based Techniques: In some advanced systems, communication-based techniques are employed, where the distributed generation sources communicate with each other or with a central control system. If communication is lost or specific messages indicate an islanding condition, the sources disconnect from the grid.
Passive Techniques: Passive anti-islanding techniques rely on the characteristics of the power grid and the distributed generation sources to automatically prevent islanding. These include approaches like impedance mismatching, phase-locked loop (PLL) instability detection, and others.
It's important to note that the implementation of anti-islanding protection may vary based on the specific regulations and standards of different regions and the characteristics of the power grid. Utility companies, system integrators, and equipment manufacturers work together to ensure the safe and reliable operation of distributed generation systems while preventing islanding events.