A Light-Dependent Resistor (LDR), also known as a photoresistor or photocell, is a type of resistor that changes its resistance based on the intensity of light falling on it. It's a type of passive component commonly used in various electronic circuits and devices to detect light levels and trigger actions accordingly.
The basic principle behind the operation of an LDR is the variation in its conductivity with light. LDRs are typically made of a semiconductor material whose electrical conductivity changes when exposed to different levels of light. Here's how it works:
Material Properties: LDRs are made from semiconductor materials that have a property called the "photoconductivity." This means their electrical conductivity changes in response to the amount of incident light. These materials have a large number of charge carriers (electrons or holes) that can be easily influenced by photons (light particles).
Photon Absorption: When light falls onto the surface of the LDR, photons from the light are absorbed by the semiconductor material. The energy from the absorbed photons excites electrons in the material, allowing them to move more freely.
Conduction Band and Valence Band: In a semiconductor, there are energy bands called the conduction band and valence band. The valence band is filled with electrons, and the conduction band is typically empty. For the material to conduct electricity, electrons need to jump from the valence band to the conduction band.
Energy Gap: There's an energy gap between the valence band and the conduction band. For the semiconductor to conduct, electrons need to acquire enough energy to bridge this gap. In the absence of light, the electrons do not have enough energy to cross this gap, and the material behaves as an insulator with high resistance.
Light Interaction: When light hits the semiconductor material of the LDR, the absorbed energy promotes some electrons to higher energy levels. This effectively reduces the energy gap, allowing more electrons to move from the valence band to the conduction band.
Conductivity Increase: The movement of more electrons into the conduction band increases the number of charge carriers available for electrical conduction. As a result, the resistance of the LDR decreases significantly. The more intense the incident light, the more electrons are excited, and the lower the resistance becomes.
Dark Resistance: When there is little to no light falling on the LDR, it remains in a high-resistance state because fewer electrons are excited, and the energy gap is too large for efficient conduction.
In practical applications, LDRs are often used in voltage divider circuits along with fixed resistors. The varying resistance of the LDR changes the voltage at the junction point of the divider, which can be measured by a microcontroller, an analog-to-digital converter, or used directly to control devices like LEDs, relays, or alarms based on ambient light conditions.