Phase-controlled rectification, also known as phase-angle control or phase-controlled modulation, is a technique used in power electronics to control the amount of DC voltage output from an AC power source. The primary application of phase-controlled rectification is in controlling the power delivered to resistive loads, such as electric heaters and lighting systems.
In an AC circuit, the voltage and current alternate in polarity and direction periodically over time. Phase-controlled rectification allows us to control the average value of the output voltage by adjusting the firing angle of a semiconductor switch, typically a thyristor or a triac.
Here's how it works:
Semiconductor Switches: Thyristors and triacs are semiconductor devices used as switches in phase-controlled rectification. Thyristors are unidirectional devices, while triacs are bidirectional, meaning they can conduct current in both directions.
Firing Angle: The firing angle is the angle of time delay between the point where the AC voltage crosses zero and the point at which the semiconductor switch is triggered to conduct current. It is measured in degrees or radians and determines how much of the AC voltage waveform is allowed to pass through to the load.
Control Circuit: A control circuit monitors the load's requirements and calculates the appropriate firing angle needed to maintain the desired output voltage or power level. This control circuit generates a control signal that triggers the semiconductor switch accordingly.
Output Voltage Control: By changing the firing angle, the portion of the AC voltage waveform that is allowed to pass through to the load changes. As the firing angle is increased, the switch conducts for a longer time during each half-cycle, resulting in a higher average output voltage. Conversely, decreasing the firing angle reduces the average output voltage.
Waveform Distortion: One important aspect to consider in phase-controlled rectification is waveform distortion. Since we are modifying the shape of the AC waveform by only allowing certain portions to pass through, harmonic content is introduced into the output. This can cause issues like increased Total Harmonic Distortion (THD) and electromagnetic interference.
Applications: Phase-controlled rectification is commonly used in dimmer switches for lighting control, temperature control in heating elements, motor speed control, and other applications where variable voltage or power control is necessary.
It's worth noting that phase-controlled rectification is not suitable for driving inductive loads, such as motors, as abrupt changes in voltage can cause undesirable effects like voltage spikes and current surges. For such applications, other control techniques, such as pulse-width modulation (PWM), are used.