A bidirectional active-clamped (AC) buck-boost converter is a type of power electronic circuit used for bidirectional power flow and voltage conversion between a source and a load. It combines the functionalities of a buck converter (step-down) and a boost converter (step-up) in a single circuit, allowing for seamless bidirectional power flow and voltage regulation.
The principle of operation can be better understood by breaking it down into its key components and stages:
Main power switches: The bidirectional AC buck-boost converter uses two sets of power switches: one set for the buck mode (step-down) and the other for the boost mode (step-up). Typically, these switches are power MOSFETs or IGBTs (Insulated Gate Bipolar Transistors).
Energy storage elements: The converter also incorporates two energy storage elements: one for the buck mode and the other for the boost mode. These energy storage elements are usually inductor-capacitor (LC) networks.
Active clamping circuit: The active clamping circuit consists of additional switches and diodes. It is connected in parallel to the main power switches, and its purpose is to provide a path for the inductor's stored energy when the main switches turn off, effectively clamping the voltage across the switches and protecting them from voltage spikes.
Operation in buck mode (step-down):
During the buck mode, the main buck switches are turned ON, connecting the input voltage source to the inductor. The inductor stores energy, and the output voltage is lower than the input voltage.
When the main switches turn OFF, the active clamping switches are turned ON, providing a path for the inductor's energy to flow. This action clamps the voltage across the main switches, preventing voltage spikes and reducing stress on the switches.
Operation in boost mode (step-up):
In the boost mode, the main boost switches are turned ON, connecting the input voltage source to the inductor in the opposite direction. The inductor now stores energy with a polarity opposite to the buck mode, and the output voltage is higher than the input voltage.
As the main boost switches turn OFF, the active clamping switches for the boost mode come into play, allowing the inductor's energy to flow safely and clamp the voltage across the main switches.
Bidirectional power flow:
The bidirectional AC buck-boost converter can easily switch between buck and boost modes by controlling the operation of the main power switches and the active clamping circuit. This flexibility enables it to transfer power bidirectionally between the input and output sides, accommodating both step-up and step-down voltage conversions.
Applications:
The bidirectional active-clamped buck-boost converter finds applications in various systems, such as renewable energy systems, battery charging, energy storage systems, electric vehicles, and grid-tied systems, where bidirectional power flow and voltage conversion are required. Its ability to clamp voltage spikes and efficiently manage power flow makes it a valuable solution in these applications.