In an induction motor, the concept of pole pairs is essential to understand its operation and the relationship between its speed and the frequency of the applied voltage.
Pole pairs refer to the number of magnetic poles on both the stator and rotor of the induction motor. Each magnetic pole consists of a North pole (N) and a South pole (S). The stator contains the primary winding, and the rotor includes the secondary winding. The primary winding, often connected to the power supply, creates a rotating magnetic field.
The number of pole pairs is determined by the construction and design of the motor. It is always an even number because each magnetic pole must have a corresponding opposite pole to complete a full magnetic cycle. The most common configurations for induction motors are 2-pole, 4-pole, 6-pole, etc.
When an AC voltage is applied to the stator windings, it generates a rotating magnetic field. The rotating magnetic field induces currents in the rotor windings, which, in turn, creates a secondary magnetic field. The interaction between the stator's rotating magnetic field and the rotor's induced magnetic field causes the rotor to rotate in the same direction as the stator's magnetic field.
The synchronous speed of an induction motor is given by the formula:
Synchronous Speed (in RPM) = (120 * Frequency of applied voltage) / Number of pole pairs
As you can see, the synchronous speed is directly proportional to the frequency of the applied voltage and inversely proportional to the number of pole pairs. Therefore, an induction motor with more pole pairs will have a lower synchronous speed, and an induction motor with fewer pole pairs will have a higher synchronous speed.
In practice, the actual operating speed of an induction motor is slightly lower than the synchronous speed. The difference between the synchronous speed and the actual operating speed is known as "slip." Slip is necessary for the rotor to produce torque and overcome the load. The greater the load, the higher the slip required for the motor to maintain rotation.