Power quality disturbances are classified and analyzed based on their characteristics and impact on the electrical system. Power quality disturbances refer to any deviation from the ideal sinusoidal waveform in the electrical power supply. These disturbances can be categorized into several types, and their analysis involves different methods and tools. Here are some common power quality disturbances and how they are classified and analyzed:
Voltage Sag (or Dip): A voltage sag is a short-duration reduction (10% to 90%) in voltage levels. It is caused by faults, starting of large loads, or faults in the distribution system. To analyze voltage sags, monitoring equipment like power quality analyzers is used to record voltage variations over time. The analysis involves examining the duration, magnitude, and frequency of the sags to determine their potential impact on sensitive equipment.
Voltage Swell (or Surge): A voltage swell is the opposite of a sag and refers to a short-duration increase in voltage levels. Swells are typically caused by switching off heavy loads or faults. Similar to voltage sags, the analysis of voltage swells requires monitoring and recording equipment to assess their magnitude and duration.
Voltage Interruption: A voltage interruption occurs when the voltage supply is completely lost for a short period. It can be caused by faults, circuit breaker operations, or equipment failures. The analysis of voltage interruptions involves determining the duration of the interruption and its impact on connected equipment and processes.
Voltage Flicker: Voltage flicker is a rapid and repetitive fluctuation in voltage levels, often caused by fluctuations in load demand. It can cause discomfort to occupants and affect sensitive equipment. To analyze voltage flicker, specialized meters like a flicker meter are used to measure flicker severity according to international standards.
Harmonic Distortion: Harmonics are sinusoidal voltage or current components with frequencies that are integer multiples of the fundamental frequency (usually 50 or 60 Hz). Harmonic distortion is caused by non-linear loads such as computers, variable speed drives, and LED lighting. To analyze harmonic distortion, power quality analyzers are used to measure harmonic levels, total harmonic distortion (THD), and individual harmonic frequencies.
Transients: Transients are short-duration, high-amplitude voltage spikes or surges caused by lightning, switching operations, or faults. They can damage sensitive electronic equipment. Transients are analyzed using transient recorders, which capture and analyze waveform anomalies.
Voltage Unbalance: Voltage unbalance occurs when the three phases of a three-phase power supply have unequal voltages. This can be caused by unbalanced loads or faulty connections. Monitoring equipment is used to measure the degree of voltage unbalance, and analysis involves assessing the impact on connected equipment.
Power quality analysis is crucial for identifying the source of disturbances, determining their severity, and implementing appropriate mitigation measures to ensure the reliable operation of electrical equipment and systems. Various power quality monitoring devices, such as power quality analyzers, voltage recorders, and flicker meters, play a vital role in this analysis process.