An inverter is an electronic device that converts direct current (DC) into alternating current (AC). This conversion is achieved through a multi-step process involving electronic components and control mechanisms. The main goal of an inverter is to generate an AC output waveform that mimics the shape and characteristics of a standard AC power supply.
Here's a simplified explanation of how an inverter works:
Rectification: The inverter's input stage involves rectifying the incoming DC power. This means converting the DC voltage into a pulsating, unidirectional waveform. This is typically done using diodes to create a series of voltage pulses.
Filtering: The pulsating waveform from the rectifier stage contains ripples due to the rapid switching of the diodes. A filter circuit, often consisting of capacitors and inductors, is used to smooth out these ripples and produce a relatively constant DC voltage.
Oscillator and Switching Circuit: The heart of the inverter is its oscillator and switching circuit. This circuit generates a high-frequency signal (often a square wave or a more complex waveform like a sinusoidal approximation) that serves as the basis for generating the desired AC waveform.
PWM Generation: In modern inverters, Pulse Width Modulation (PWM) is a commonly used technique. The high-frequency oscillator signal is used to modulate the width of the pulses, creating a waveform that closely resembles a sinusoidal AC waveform. By adjusting the pulse width, the inverter can control the amplitude of the AC output voltage.
Switching Transistors: The modulated signal is then fed to a set of high-power switching transistors (usually insulated gate bipolar transistors or IGBTs) that rapidly turn on and off according to the modulated signal. These transistors effectively chop the filtered DC voltage into pulses that follow the modulation pattern.
Output Filter: Similar to the input stage, an output filter is used to smooth out the pulse-width-modulated waveform generated by the switching transistors. This filter helps to eliminate high-frequency components and produce a cleaner sinusoidal AC waveform.
Output AC Voltage: The result is an AC waveform that, after passing through the output filter, closely resembles the desired sinusoidal AC voltage at the desired frequency. The frequency and amplitude of this AC output can often be controlled by adjusting the parameters of the oscillator and modulation circuit.
It's important to note that there are various types of inverters, including square wave inverters (simplest form, less common nowadays), modified sine wave inverters (approximate sinusoidal waveform), and pure sine wave inverters (produce a high-quality sinusoidal waveform). The type of inverter used depends on the application, with pure sine wave inverters being preferred for sensitive electronic equipment due to their ability to replicate utility-grade AC power.