A self-excited induction generator (SEIG) is a type of asynchronous AC generator that is capable of generating electrical power without the need for an external power source to establish its magnetic field. It operates based on the principle of electromagnetic induction, similar to a regular induction motor, but it is designed to work as a generator.
Here's a general overview of how a self-excited induction generator operates in AC power systems:
Initial Conditions: The SEIG starts with its rotor (squirrel cage) at standstill. There is no initial magnetic field present, and no external power source is connected to the rotor circuit.
Mechanical Input: The generator is mechanically driven by a prime mover, such as a wind turbine, water turbine, or an engine. As the rotor begins to turn, it induces a voltage in its stator winding according to Faraday's law of electromagnetic induction.
Induced Voltage: The rotor's movement induces voltage in the stator windings due to the changing magnetic flux. This induced voltage leads to the flow of stator current, which creates a rotating magnetic field in the stator.
Rotating Magnetic Field: The rotating magnetic field in the stator interacts with the stationary rotor conductors. This interaction causes an electromotive force (EMF) to be induced in the rotor circuit, which in turn leads to rotor current.
Rotor Current and Magnetic Field: The rotor current creates its own magnetic field, which opposes the relative motion between the stator and rotor. This opposition to motion is what causes the rotor to accelerate and increase its speed.
Synchronization: As the rotor accelerates, it approaches the synchronous speed (the speed at which the stator magnetic field rotates). When the rotor speed approaches synchronous speed, the slip (difference between synchronous speed and rotor speed) decreases, and the induced rotor current decreases as well.
Excitation and Voltage Buildup: As the rotor speed nears synchronization, the slip and rotor current continue to decrease, and the rotor's magnetic field strengthens. This self-excited magnetic field generates voltage in the stator windings, and as the rotor approaches synchronous speed, the generator's terminal voltage increases.
Steady-State Operation: Once the rotor reaches very close to synchronous speed, the slip becomes negligible, and the generator operates at steady-state conditions. The generated voltage is now sufficient to maintain the magnetic field and support the flow of current to the connected load.
It's important to note that the voltage regulation and stability of a self-excited induction generator can be challenging, as the generation process is highly dependent on factors like mechanical input, load variations, and system parameters. SEIGs are commonly used in small-scale renewable energy applications, such as wind or hydroelectric power systems, where a separate excitation source may not be practical or available. However, they may require additional control and protection mechanisms to ensure stable and reliable operation.