A basic AC transformer is an electromagnetic device that is widely used to step up or step down alternating current (AC) voltages while maintaining the frequency. It consists of two coils of wire wound around a common iron core. These coils are known as the primary coil and the secondary coil. The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.
Here's how a basic AC transformer operates:
Mutual Induction: When an AC voltage is applied to the primary coil, it generates an alternating magnetic field around the coil. This changing magnetic field induces an alternating current in the secondary coil due to the principle of mutual induction. The secondary coil is wound around the same core, so it's exposed to the changing magnetic field generated by the primary coil.
Faraday's Law of Electromagnetic Induction: According to Faraday's law, the changing magnetic field induces a voltage across the secondary coil. The magnitude of the induced voltage depends on the rate of change of the magnetic field and the number of turns in the coil.
Turns Ratio: The turns ratio of a transformer is the ratio of the number of turns in the secondary coil (Ns) to the number of turns in the primary coil (Np). It's represented by the equation: Turns Ratio (a) = Ns / Np. This ratio determines whether the transformer steps up or steps down the voltage.
Voltage Transformation: If the turns ratio (a) is greater than 1, the transformer is a step-up transformer. This means that the secondary voltage (Vs) will be higher than the primary voltage (Vp). Conversely, if the turns ratio is less than 1, the transformer is a step-down transformer, and the secondary voltage will be lower than the primary voltage.
Ideal Transformer Assumptions: In an ideal transformer, there is no energy loss due to resistance, and the magnetic core has no losses. This means that the power in the primary coil is equal to the power in the secondary coil, neglecting minor losses.
Conservation of Energy: Since power (P) is the product of voltage (V) and current (I), the relationship between the primary and secondary voltage and current can be expressed as: Vp * Ip = Vs * Is. In other words, the product of the primary voltage and current equals the product of the secondary voltage and current.
Frequency Maintenance: The transformer does not change the frequency of the AC signal; it only changes the voltage. This is because the induction process depends on the rate of change of the magnetic field, which is directly proportional to the frequency of the AC source.
In practice, real transformers have some losses due to resistive heating in the wires, hysteresis losses in the core, and other factors. However, the basic principles described above remain the same for both ideal and real transformers.