A vacuum circuit breaker is a type of electrical switching device used in AC (alternating current) networks to control the flow of electric current. It is specifically designed to interrupt or make and break the circuit under normal and fault conditions. Vacuum circuit breakers are often employed in medium to high voltage applications, ranging from a few kilovolts to several tens of kilovolts.
The operation of a vacuum circuit breaker can be understood through the following steps:
Closed Position:
In its normal operating state, the vacuum circuit breaker's contacts are closed, allowing the flow of electric current through the circuit. The contacts are made of materials that can withstand the high electrical and thermal stresses.
Electromagnetic Operation:
When a control signal, typically generated by protective relays, indicates a fault or an abnormal condition in the electrical network, the vacuum circuit breaker needs to open its contacts quickly to isolate the faulty section from the rest of the network. This control signal energizes the trip coil (electromagnet) of the vacuum circuit breaker.
Contact Separation:
The energized trip coil generates a magnetic field that opposes the spring force holding the contacts together. As the magnetic force becomes stronger than the spring force, the contacts begin to separate.
Arc Quenching:
As the contacts separate, an electric arc forms between them due to the current flow. Unlike air or other gases, the vacuum inside the circuit breaker does not support the continuous existence of the arc. The vacuum's high dielectric strength and insulating properties cause the arc to extinguish quickly, usually within a few milliseconds. This rapid arc quenching prevents damage to the contacts and surrounding components.
Contact Opening:
Once the arc is extinguished, the contacts continue to move apart due to the spring's force. This opening action creates a gap between the contacts, breaking the electrical circuit.
Isolation and Interruption:
With the contacts open, the vacuum circuit breaker isolates the faulty section of the circuit. The interruption of current flow prevents the fault from spreading to other parts of the network.
Closing Operation:
After the fault is cleared and the system is restored to normal conditions, the vacuum circuit breaker can be reset to its closed position. This is typically done manually or through a remote control signal. The contacts are brought back into contact, allowing the current to flow through the circuit once again.
Key advantages of vacuum circuit breakers include their ability to handle high switching frequencies, their minimal maintenance requirements due to absence of arc-related deterioration, and their compact design. However, they are usually limited to medium and high voltage applications and might not be suitable for low voltage applications due to their specific characteristics.