A magneto-optical sensor, also known as a Faraday effect sensor, is a type of current sensor used to measure electric currents in high-voltage systems. The principle behind this sensor is based on the Faraday effect, which describes how the polarization of light changes when it passes through a medium subjected to a magnetic field. Here's a basic overview of how a magneto-optical sensor works to measure current in high-voltage systems:
Magneto-Optical Material: The sensor contains a magneto-optical material, typically a garnet crystal or a glass-based material doped with rare-earth ions like terbium or yttrium. These materials exhibit the Faraday effect, where the polarization plane of light rotates when a magnetic field is applied along the direction of light propagation.
Light Source: The sensor has a light source, often a laser diode, that emits polarized light with a known polarization direction. This polarized light is passed through the magneto-optical material.
Magnetic Field: When an electric current flows through a conductor, it generates a magnetic field around it according to Ampere's law. In the case of a high-voltage system, the current-carrying conductor can be a high-voltage power line or a busbar. The magnetic field generated by the current causes a rotation in the polarization plane of the light passing through the magneto-optical material.
Polarization Rotation Measurement: After passing through the magneto-optical material and being affected by the magnetic field, the light exits the material and reaches a polarizer. The polarizer is oriented at an angle relative to the initial polarization direction of the light. As a result, the rotated polarization of the light is now partly transmitted through the polarizer.
Photodetector: A photodetector, such as a photodiode or a phototransistor, is placed behind the polarizer. It measures the intensity of the light that passes through the polarizer. The amount of light transmitted through the polarizer depends on the angle of polarization rotation induced by the magnetic field, which is directly proportional to the current flowing through the conductor.
Current Measurement: The photodetector's output is then processed by electronic circuitry to convert the light intensity into an electrical signal. This signal is calibrated to correspond to the actual current flowing through the conductor.
Advantages of magneto-optical sensors include their ability to measure high currents accurately, their non-contact nature (they do not require direct electrical connections to the current-carrying conductor), and their immunity to electromagnetic interference. They are commonly used in high-voltage applications where traditional current measurement methods, such as current transformers, may not be feasible or reliable.