Discharging of a capacitor refers to the process by which the stored electrical energy in a capacitor is released and its voltage drops to zero. Capacitors store electric charge and energy in an electric field between two conductive plates separated by an insulating material, also known as a dielectric.
When a charged capacitor is connected to a circuit that forms a closed loop, such as a resistor, the capacitor begins to discharge. The discharge process involves the flow of current from one plate of the capacitor to the other through the connected circuit. Here's how the discharge process typically occurs:
Initial State: The capacitor is charged and has a certain voltage across its plates. Let's say the voltage across the capacitor is "V" and the charge stored is "Q".
Connecting the Circuit: When a circuit is connected to the charged capacitor, current starts flowing through the circuit. The current flows because the charges on one plate of the capacitor are attracted to the opposite charges on the other plate, causing them to move through the circuit.
Current Flow: As the circuit is closed, the current initially flows at its maximum value, determined by Ohm's law (I = V/R, where "I" is current, "V" is voltage, and "R" is resistance). This current starts to discharge the capacitor.
Voltage Drop: As the charge on the capacitor decreases, the voltage across its plates also decreases. The rate of voltage drop is exponential and can be described by the equation:
V(t) = Vā * e^(-t / RC)
where:
V(t) is the voltage across the capacitor at time "t".
Vā is the initial voltage across the capacitor.
e is the mathematical constant (~2.71828).
t is time.
RC is the time constant of the circuit, equal to the product of resistance (R) and capacitance (C).
Exponential Decay: As time passes, the voltage across the capacitor decreases exponentially. The time it takes for the voltage to drop to approximately 36.8% of its initial value is known as the time constant (RC). After about 5 time constants, the capacitor is considered effectively discharged.
Completion of Discharge: Eventually, the voltage across the capacitor drops close to zero, and the capacitor is fully discharged. This means that the charges have moved from one plate to the other until equilibrium is reached.
The process of discharging a capacitor is used in various electronic applications, such as timing circuits, energy storage systems, and flash photography, where controlled energy release is required.