Protection against overvoltages is a critical aspect of power system operation and equipment safety. Overvoltages can be caused by various factors, such as lightning strikes, switching operations, and faults in the power system. These overvoltages can damage or degrade sensitive equipment, disrupt power supply, and pose safety risks to personnel. To mitigate these risks, protective measures and devices are employed in power systems, and switchgear plays a key role in this protection.
Here are some methods and devices used for protection against overvoltages:
Surge Arresters: Surge arresters, also known as lightning arresters or lightning rods, are devices used to divert or limit the transient overvoltage caused by lightning strikes or other transient disturbances. They are typically connected between the equipment to be protected and ground. Surge arresters provide a low-impedance path for the transient current to flow to ground, thereby protecting the connected equipment from excessive voltage levels.
Overvoltage Relays: Overvoltage relays are protective devices that monitor the voltage levels in the system. When the voltage exceeds a predetermined threshold, these relays can initiate protective actions, such as tripping circuit breakers to isolate the affected part of the system.
Voltage Transformers (VTs) and Potential Transformers (PTs): These devices are used to step down high voltage levels to a lower, manageable level for measurement and protection purposes. They ensure that the protective relays receive accurate voltage signals for proper operation.
Isolation and Disconnection: In the event of overvoltages, switchgear can be programmed to isolate or disconnect affected parts of the system. This prevents the overvoltage from propagating further and causing damage to downstream equipment.
Automatic Reclosing Devices: Automatic reclosing devices are used to automatically close circuit breakers after a momentary fault or disturbance. However, if the overvoltage persists, these devices may block reclosure to prevent damage.
Grounding and Shielding: Proper grounding and shielding techniques help to dissipate and redirect overvoltages safely. This includes grounding electrodes, grounding conductors, and shielding equipment from external disturbances.
System Design and Coordination: A well-designed power system includes appropriate insulation coordination, selection of equipment ratings, and careful arrangement of components to minimize the risk of overvoltages and ensure that protective devices respond effectively.
Voltage Regulation: Voltage regulation devices, such as tap changers on transformers and voltage regulators, help maintain the desired voltage levels and prevent voltage from deviating excessively from the specified range.
Lightning Protection: Lightning protection systems, including grounding conductors, lightning masts, and down conductors, help direct lightning currents safely to ground, reducing the risk of overvoltages.
It's important to note that protection against overvoltages is a comprehensive and multi-faceted approach involving various engineering techniques and devices. Proper coordination, system design, and equipment selection are essential to ensure effective protection against overvoltages and the reliable operation of power systems.