The purpose of a voltage divider in a circuit is to divide the voltage across two or more components in proportion to their resistance values. It is a simple and commonly used circuit arrangement that allows you to obtain a fraction of the input voltage at a specific point in the circuit. The voltage divider is typically constructed using resistors.
The basic configuration of a voltage divider consists of two resistors connected in series between the input voltage (V_in) and ground. The output voltage (V_out) is then taken from the connection point between the two resistors.
The formula for calculating the output voltage (V_out) in a voltage divider circuit is:
V_out = (R2 / (R1 + R2)) * V_in
Where:
R1 and R2 are the resistance values of the two resistors in the circuit.
V_in is the input voltage supplied to the voltage divider.
The output voltage (V_out) is a fraction of the input voltage (V_in), and the fraction is determined by the resistance values of R1 and R2. By choosing appropriate resistor values, you can set the output voltage to the desired level.
Voltage dividers find applications in various scenarios, such as:
Setting reference voltages: They are used to generate specific voltage levels for biasing components, such as transistors or operational amplifiers.
Sensor interfacing: Voltage dividers are employed to scale down the output voltage of sensors to a level that can be measured by microcontrollers or other monitoring circuits.
Analog-to-digital conversion: In some cases, when the input voltage range of an analog-to-digital converter (ADC) exceeds the desired range, a voltage divider is used to scale down the voltage to match the ADC's input range.
LED brightness control: Voltage dividers can control the brightness of LEDs by adjusting the voltage across them.
Level shifting: They can convert logic signal levels from one voltage range to another.
It is essential to note that voltage dividers have limitations, especially in high-power or high-precision applications, as they are affected by variations in load impedance and can dissipate significant power as heat. In such cases, other voltage regulation or conditioning techniques might be more appropriate.