A Silicon-Controlled Rectifier (SCR) is a semiconductor device that acts as an electrically controlled switch for high-power applications. It is also known as a thyristor. The SCR has three terminals: Anode (A), Cathode (K), and Gate (G). The primary function of an SCR is to control the flow of current in a unidirectional manner, like a rectifier, but with an additional feature of being able to turn on and off using a gate signal.
Here's how an SCR works:
Off State: In its default or off state, the SCR behaves like an open circuit, and no current flows through it. The gate terminal is typically not biased, meaning no voltage is applied to it.
Forward Voltage (On-State Triggering): When a forward voltage is applied between the anode and cathode terminals (A to K), the SCR remains off. Even if the forward voltage exceeds the SCR's breakdown voltage, the device will not conduct until the gate terminal receives a specific triggering signal.
Gate Triggering: To turn the SCR on, a pulse of positive voltage is applied to the gate terminal (G) concerning the cathode (K). This gate pulse should have sufficient amplitude and duration to initiate the conduction process. Once this triggering voltage is applied, it creates an internal path for current flow from the anode to the cathode.
Conduction (On State): Once triggered, the SCR enters the conduction state and behaves like a closed switch. It allows a significant amount of current to flow through it with very little voltage drop across its terminals. It remains in this conducting state even if the gate voltage is removed because the anode current sustains the current flow.
Turn-off Mechanism: The SCR stays in the conducting state until the current flowing through it drops below a certain threshold value (called the holding current) or the forward voltage across the SCR becomes zero. To turn off the SCR, the forward voltage across it must be reduced below a certain level (the "off-state" voltage) or the anode current must be reduced below the holding current.
Reverse Voltage Blocking: The SCR can block current flow in the reverse direction (from cathode to anode) like a diode. It can withstand a certain reverse voltage, known as the "reverse breakdown voltage" or "peak inverse voltage" (PIV), without conducting in the reverse direction.
SCRs are widely used in various applications, such as motor control, power regulation, light dimming, overcurrent protection, and electric heating, where high-power switching and control are required. They offer efficient and reliable means for controlling electrical power in industrial and consumer electronic systems.