A Single-Photon Avalanche Diode (SPAD) is a type of semiconductor device that is specifically designed for photon counting applications. It operates in a way that allows it to detect individual photons with high sensitivity and low noise. The primary function of a SPAD is to convert incoming photons into detectable electrical signals, enabling the counting and timing of single photons.
Here's a basic explanation of the operation of a SPAD in photon counting:
Photon Absorption: When a photon with sufficient energy (typically in the form of light) strikes the active area of the SPAD, it is absorbed by the semiconductor material (usually silicon) used in the device. The absorbed photon provides enough energy to create an electron-hole pair in the semiconductor.
Avalanche Breakdown: The creation of this electron-hole pair initiates a process called avalanche breakdown. In normal diodes, this process is undesirable and can damage the device, but in SPADs, it is intentionally harnessed for photon counting.
Carrier Multiplication: During avalanche breakdown, the newly created electron-hole pair gains enough energy to create additional electron-hole pairs in a chain reaction. This phenomenon is known as carrier multiplication or impact ionization. The number of electron-hole pairs generated depends on the gain of the SPAD, which is determined by the device's structure and bias voltage.
Avalanche Quenching: To prevent continuous multiplication and potential device damage, the SPAD must be quickly quenched or turned off after the avalanche process. This is achieved by using a quenching circuit that rapidly reduces the voltage across the SPAD to a level where the avalanche process ceases.
Signal Output: The avalanche process results in a detectable electrical pulse that can be measured and processed by external electronics. The amplitude of this pulse is generally much higher than the original photon signal, making it easier to detect and process using standard electronics.
Photon Counting: Since each absorbed photon triggers a single avalanche event and results in a distinct electrical pulse, the SPAD can effectively count individual photons. By measuring the number and timing of these pulses, it is possible to determine the intensity of the incident light or the time intervals between photon arrivals.
SPADs are widely used in various applications, including quantum optics, time-resolved spectroscopy, fluorescence lifetime measurements, LIDAR (Light Detection and Ranging), and other tasks that require high-sensitivity single-photon detection and precise photon counting. Their ability to detect single photons with high efficiency and low noise makes them invaluable tools in modern research and technology.