A Rogowski coil is an electromagnetic device used to measure alternating current (AC) in power systems without the need for direct electrical contact with the conductor carrying the current. It operates based on the principle of magnetic induction and is particularly useful in situations where it may be challenging or impractical to use traditional current transformers.
Here's how a Rogowski coil works to measure AC current:
Coil Design: The Rogowski coil is essentially a flexible coil of wire wound around a non-magnetic, hollow, and air-core former. The coil is typically made of a thin, highly flexible wire, allowing it to be wrapped around the current-carrying conductor easily.
Magnetic Induction: When an alternating current flows through the conductor, it generates a changing magnetic field around it according to Ampere's law. This varying magnetic field induces a voltage across the turns of the Rogowski coil as it cuts through the magnetic lines of flux.
Induced Voltage: The induced voltage across the Rogowski coil is proportional to the rate of change of the magnetic flux, which, in turn, is proportional to the rate of change of the current in the conductor. The induced voltage is not dependent on the actual value of the current but on its rate of change.
Integration: To measure the actual AC current, the induced voltage from the Rogowski coil needs to be integrated over time. The integration process combines the instantaneous voltage signal to reconstruct the original AC waveform of the current.
Signal Conditioning: After integration, the output of the Rogowski coil is often passed through signal conditioning circuits to scale the output appropriately and provide the desired output signal (typically a voltage) that is proportional to the AC current being measured.
Measurement: The conditioned output can then be connected to data acquisition systems, oscilloscopes, or other measuring instruments to display or record the AC current waveform and relevant parameters.
Advantages of Rogowski Coils:
They have a flexible design, making them easier to install and fit around irregularly shaped conductors.
They do not have a magnetic core, reducing hysteresis losses and saturation effects.
They have a wider bandwidth compared to some conventional current transformers, making them suitable for high-frequency applications.
They have lower weight and size, making them more portable and convenient to use.
Overall, the Rogowski coil offers a non-intrusive and flexible solution for AC current measurements in power systems, especially in situations where traditional current transformers may not be practical or feasible.