A conductance amplifier is a type of electronic circuit that measures the inverse of resistance, which is known as conductance. Conductance is the ease with which electric current flows through a material or a circuit component. Conductance is the reciprocal of resistance, and its unit of measurement is the siemens (S), which is equal to 1/ohm.
The basic principle behind a conductance amplifier involves converting the current passing through a device into a voltage signal that is proportional to the conductance of that device. This voltage output can then be easily measured and used for various applications. Let's take a look at how a conductance amplifier accomplishes this:
Transconductance Amplifier: The core component of a conductance amplifier is usually a transconductance amplifier. A transconductance amplifier is a type of operational amplifier (op-amp) circuit that measures the current at its input and produces a proportional voltage at its output.
Current-to-Voltage Conversion: The conductance amplifier takes the current being measured and converts it into a voltage. The current to be measured is passed through a known resistor (known as the transconductance feedback resistor) connected to the input of the amplifier.
Ohm's Law: According to Ohm's law, the voltage (V) across a resistor is equal to the product of the current (I) flowing through it and its resistance (R): V = I * R.
Transconductance Equation: In a conductance amplifier, the voltage output (Vout) is proportional to the current input (Iin) and the transconductance feedback resistor (Rf), according to the following equation: Vout = -Iin * Rf.
Inverting Configuration: The negative sign in the transconductance equation indicates that the output voltage is inverted relative to the input current. This is because the amplifier is typically configured as an inverting amplifier.
Measuring Conductance: Since conductance (G) is the inverse of resistance (R), conductance (G) can be expressed as G = 1/R. Therefore, the voltage output of the conductance amplifier is directly proportional to the conductance of the component being measured.
Applications:
Conductance amplifiers are widely used in scientific and industrial instruments for measuring the conductance of materials and components.
They are used in various sensors, such as gas sensors, where conductance changes in response to the presence of certain gases.
In biomedical applications, conductance amplifiers can be utilized in devices that measure the conductance of biological tissues, such as for monitoring skin conductance or analyzing the properties of biological membranes.
By using conductance amplifiers, engineers and scientists can easily measure and work with conductance values in electronic circuits and various applications, providing valuable insights and control over the behavior of different materials and components.