In a transformer, the relationship between voltage, current, and turns is governed by the principle of electromagnetic induction. A transformer is a static device that transfers electrical energy from one circuit to another through mutual induction between two or more coils, usually wound around a common iron core.
The basic components of a transformer are two coils of wire, known as the primary and secondary windings. When an alternating current (AC) flows through the primary winding, it generates a changing magnetic field around the winding. This changing magnetic field induces an electromotive force (EMF) or voltage in the secondary winding, as described by Faraday's law of electromagnetic induction.
The relationship between the primary and secondary voltages, currents, and turns in a transformer can be expressed by the following formula:
Vp / Vs = Np / Ns
Where:
Vp is the voltage in the primary winding,
Vs is the voltage in the secondary winding,
Np is the number of turns in the primary winding, and
Ns is the number of turns in the secondary winding.
According to the formula, the ratio of voltages in the primary and secondary windings is equal to the ratio of the number of turns in the respective windings. This implies that if the number of turns in the secondary winding is greater than the number of turns in the primary winding (Ns > Np), the secondary voltage (Vs) will be higher than the primary voltage (Vp). Conversely, if Ns < Np, the secondary voltage will be lower than the primary voltage.
It's important to note that the transformer operates based on the principle of conservation of energy. Therefore, while the voltage can be transformed between different levels, the product of voltage and current in the primary and secondary circuits remains approximately constant, neglecting losses. That is:
Vp * Ip ≈ Vs * Is
Where:
Ip is the current in the primary winding, and
Is is the current in the secondary winding.
In practical transformers, some energy losses occur due to resistive heating, hysteresis, and eddy currents in the core, so the output power is always slightly lower than the input power.
Transformers play a crucial role in electrical power transmission and distribution, as well as in various electronic devices, by allowing efficient voltage transformations and isolation between circuits.