A flyback converter is a type of isolated switching-mode power supply that can efficiently step up or step down voltage levels. It is widely used in various electronic devices and power applications. The key components of a flyback converter are a transformer, a power switch (usually a MOSFET), a diode, and capacitors.
Here's a simplified explanation of how a flyback converter works:
Switch on: The input voltage from the power source is applied to the primary winding of the transformer. The power switch (MOSFET) is turned on, allowing current to flow through the primary winding and build up energy in the transformer's core. The primary winding is typically wound over the same core leg as the secondary winding, but the windings are isolated electrically.
Energy storage: While the switch is on, energy is stored in the transformer's core. The energy is stored in the form of magnetic flux.
Switch off: When the energy storage time is complete (controlled by the switch's duty cycle), the power switch is turned off. As the magnetic field collapses due to the switch-off, a voltage is induced across the secondary winding. This voltage depends on the turns ratio between the primary and secondary windings.
Output voltage: The diode connected to the secondary winding allows the current to flow towards the output, where it charges the output capacitor(s) and provides power to the load. The diode ensures that the energy stored in the transformer's core is transferred to the output.
Isolation: Since the primary and secondary windings are isolated, the flyback converter provides electrical isolation between the input and output, making it suitable for applications where isolation is essential.
Voltage regulation: To regulate the output voltage, the flyback converter uses a feedback control loop. The output voltage is monitored, and based on the difference between the desired and actual output voltage, the duty cycle of the switch is adjusted to achieve the desired output voltage.
Repetition: The above steps are repeated at a high frequency (typically tens of kHz to several hundred kHz) to ensure a continuous flow of energy and maintain the desired output voltage.
Advantages of flyback converters include simplicity, low component count, and the ability to provide electrical isolation. However, they are more suitable for lower-power applications due to their operating principles and transformer design. For higher power applications, other types of switching converters like forward converters or push-pull converters are more common.