A tunnel diode, also known as an Esaki diode, is a type of semiconductor diode that exhibits a unique behavior called "negative resistance." It was first introduced by Leo Esaki in 1957, and it operates based on the principle of quantum tunneling.
The basic structure of a tunnel diode consists of a heavily doped semiconductor material, typically made of gallium arsenide (GaAs) or silicon (Si), with a thin and highly doped region called the "tunneling region" sandwiched between two lightly doped regions. The heavy doping leads to a high concentration of charge carriers in the material.
The negative resistance property arises due to a quantum mechanical phenomenon called tunneling. When a voltage is applied to the tunnel diode, a portion of the charge carriers (electrons or holes) in the heavily doped region gains enough energy to overcome the potential barrier of the tunneling region and "tunnel" through it to the other side.
Here's how the tunneling process leads to negative resistance:
Forward bias: When a voltage is applied in the forward direction (positive voltage on the heavily doped side and negative voltage on the lightly doped side), the energy of the charge carriers increases. Some of these carriers possess enough energy to tunnel through the thin tunneling region to the other side, resulting in a significant current flow.
Negative resistance region: As the voltage increases, more charge carriers tunnel through the tunneling region, leading to a sudden increase in current. This counterintuitive behavior is known as "negative resistance" because an increase in voltage leads to a decrease in resistance (and hence an increase in current). This stands in contrast to typical resistors, where increasing voltage results in increased current due to positive resistance.
Peak current point: Eventually, as the voltage continues to rise, the tunnel diode reaches its maximum tunneling capacity, and the current saturates or levels off. This point is called the "peak current point."
Reverse bias: If the voltage is applied in the reverse direction, the tunnel diode behaves like a regular diode and allows only a small leakage current to pass.
The negative resistance property makes tunnel diodes useful in various applications, such as microwave oscillators, amplifiers, and high-speed switching circuits. They are also employed in certain niche applications, like low-noise receivers, where their unique characteristics are beneficial.
However, it's essential to note that tunnel diodes have limitations and are not as widely used as traditional diodes. The negative resistance region is highly sensitive to changes in voltage, making them prone to instability and requiring careful circuit design to avoid unwanted oscillations. Despite their limited applications, tunnel diodes remain an intriguing component of semiconductor physics and electronic devices.