A centrifugal switch is a device used in some electric motors to assist in disconnecting the start winding from the circuit once the motor reaches a certain speed. Electric motors with split-phase or capacitor start designs typically employ a centrifugal switch. The purpose of this switch is to improve the motor's efficiency and prevent damage to the winding when the motor is running at full speed.
Here's how a centrifugal switch works to disconnect the start winding:
Starting the motor: When the motor is first switched on, both the start winding and the run winding are energized. The start winding provides the initial torque needed to get the motor up to speed, while the run winding maintains the rotation once the motor is running.
Centrifugal force: The centrifugal switch is mounted on the motor shaft near the end of the start winding. As the motor starts to spin, the switch is also rotating at the same speed. The switch has weighted arms or springs that are affected by centrifugal force.
Reaching a certain speed: Once the motor reaches a specific speed (usually close to the operating speed), the centrifugal force acting on the switch's components becomes strong enough to cause the switch to move or open.
Disconnecting the start winding: When the centrifugal switch opens, it breaks the electrical connection to the start winding, effectively disconnecting it from the circuit. At this point, only the run winding remains energized, and it continues to power the motor.
Preventing overheating and damage: The start winding is designed for high starting torque but is not as efficient during continuous operation. If the start winding remains energized at full speed, it can overheat and damage the motor. By disconnecting it with the centrifugal switch, the motor's efficiency improves, and the risk of overheating is reduced.
Prolonging the motor's life: The centrifugal switch helps protect the motor from excessive wear and stress during continuous operation. By removing the start winding from the circuit at the appropriate speed, the motor can run more smoothly and last longer.
It's important to note that not all electric motors use centrifugal switches. Some motors, like permanent split capacitor (PSC) motors, have different starting mechanisms that don't require a centrifugal switch. However, in motors that do use this mechanism, the centrifugal switch is a crucial component for proper motor operation and efficiency.