Power is transferred between primary and secondary windings in a transformer through the process of electromagnetic induction. A transformer consists of two or more coils of wire, called windings, which are usually wound around a common core made of a ferromagnetic material like iron. These windings are electrically isolated from each other but are magnetically coupled through the core.
Here's how power transfer occurs between the primary and secondary windings of a transformer:
AC Voltage Applied to the Primary Winding: An alternating current (AC) voltage is applied to the primary winding of the transformer. As the AC voltage alternates direction, it generates a changing magnetic field around the primary winding.
Induction of Magnetic Field: The changing magnetic field produced by the primary winding induces a corresponding alternating voltage in the secondary winding. This phenomenon is known as electromagnetic induction and follows Faraday's law of electromagnetic induction.
Voltage Transformation: The induced voltage in the secondary winding is proportional to the turns ratio between the primary and secondary windings. If the secondary winding has more turns than the primary winding, the secondary voltage will be higher than the primary voltage (step-up transformer). If the secondary winding has fewer turns, the secondary voltage will be lower (step-down transformer).
Power Transfer: The power transfer between the primary and secondary windings is governed by the principle of conservation of energy. The power (P) in the primary winding is equal to the power in the secondary winding, neglecting losses:
P_primary = P_secondary
Where:
P_primary = Voltage_primary * Current_primary
P_secondary = Voltage_secondary * Current_secondary
Since the voltage ratio is related to the turns ratio and the current ratio is inversely related to the turns ratio (due to conservation of energy), the power transfer is maintained.
Isolation: Importantly, the primary and secondary windings are electrically isolated from each other, meaning there is no direct electrical connection between them. This isolation ensures that the input and output circuits remain separate and safe.
In summary, power transfer in a transformer occurs through electromagnetic induction. The changing magnetic field generated by the primary winding induces a voltage in the secondary winding, and the turns ratio determines the voltage transformation between the primary and secondary sides. The power transferred is conserved based on the principles of energy conservation, and the isolation between windings ensures electrical separation between input and output circuits.