A Brushless DC (BLDC) motor is an electric motor that operates using direct current (DC) and does not require physical brushes to transfer electrical power to the motor's rotating armature. Instead, BLDC motors use electronic commutation to control the energizing of the motor's windings and achieve rotation. Here's how a basic BLDC motor operates:
Stator: The motor has a fixed part called the stator, which consists of multiple coils or windings that are evenly spaced around the inner circumference of the motor housing. These windings are arranged in a way that creates a set of alternating North and South magnetic poles when current flows through them.
Rotor: The rotor is the rotating part of the motor and is typically equipped with permanent magnets. The number of magnet poles on the rotor is usually different from the number of stator windings, creating a difference in pole pairs. This difference is what allows the motor to generate motion.
Hall Effect Sensors: Mounted on the stator are Hall effect sensors. These sensors detect the position of the rotor's magnetic field relative to the stator. The information from these sensors is crucial for the electronic commutation process.
Electronic Commutation: BLDC motors use electronic commutation to control the direction and speed of rotation. The Hall effect sensors send signals to the motor controller, informing it about the rotor's current position. Based on this information, the motor controller determines which stator winding needs to be energized next.
Phases: The windings on the stator are divided into three phases - often labeled as U, V, and W. The motor controller sends current through these phases in a specific sequence to create a rotating magnetic field. This magnetic field interacts with the permanent magnets on the rotor, causing it to turn.
Trapezoidal or Sinusoidal Commutation: The commutation sequence can be either trapezoidal or sinusoidal. Trapezoidal commutation involves energizing one phase at a time, creating a stepped, trapezoidal-shaped current waveform. Sinusoidal commutation, on the other hand, aims to mimic a smooth sine wave by varying the current levels in the phases.
Hall Sensor Feedback: The Hall effect sensors continuously provide feedback to the motor controller, helping it adjust the commutation sequence as the rotor rotates. This closed-loop feedback allows the controller to maintain proper synchronization and control over the motor's operation.
Rotation: As the motor controller continues to switch the currents in the stator windings according to the commutation sequence, the rotor experiences a magnetic force that causes it to rotate. The speed and direction of rotation can be controlled by adjusting the frequency and amplitude of the currents sent to the windings.
BLDC motors offer several advantages over brushed motors, including higher efficiency, longer lifespan due to the absence of brushes that wear out, and better controllability. They find applications in various industries, such as automotive systems, industrial automation, consumer electronics, and more.