A single-phase active-clamped (AC) flyback converter is a type of power electronics circuit used to efficiently convert and regulate electrical power from a direct current (DC) input voltage to an output voltage of a different level. It combines the principles of a flyback converter with an active-clamping mechanism to improve overall performance and reduce stress on components.
Here's how a single-phase active-clamped flyback converter operates:
Input Stage: The converter begins by taking in a DC input voltage, often from a rectified AC source or a battery. This input voltage is typically unregulated and can vary in magnitude.
Primary Switch and Transformer: The input voltage is fed into the primary winding of a transformer. A primary switch, often a power MOSFET or an IGBT, is used to control the energy transfer to the transformer. When the primary switch is turned on, energy is stored in the transformer's primary winding. When the switch is turned off, the energy is transferred to the secondary winding.
Energy Transfer and Clamping: In a standard flyback converter, turning off the primary switch causes a voltage spike due to the energy stored in the transformer's magnetic field. However, in an active-clamped flyback converter, a secondary switch (usually a MOSFET) is employed in parallel with a clamping capacitor across the primary winding. As the primary switch turns off, the secondary switch is turned on, allowing the energy stored in the transformer to be transferred to the clamping capacitor instead of causing a voltage spike.
Voltage Clamping: The clamping capacitor absorbs and stores the energy that would have otherwise caused a voltage spike. This effectively limits the voltage across the primary winding and prevents stress on the components caused by voltage spikes. The energy stored in the clamping capacitor can later be dissipated or utilized.
Output Rectification and Filtering: On the secondary side of the transformer, a diode or synchronous rectifier is used to rectify the voltage, converting it to a DC voltage. This voltage is then filtered using an output capacitor to reduce ripple and provide a more stable output voltage.
Output Regulation: To regulate the output voltage, a feedback control loop is often employed. A voltage or current sensing mechanism measures the output and sends a signal to a controller (such as a pulse-width modulation controller) to adjust the duty cycle of the primary switch. This control loop ensures that the output voltage remains stable even in the presence of varying input voltages or load conditions.
Isolation: The transformer used in the flyback converter provides galvanic isolation between the input and output sides, which can be important for safety and noise immunity.
Overall, a single-phase active-clamped flyback converter offers improved efficiency, reduced stress on components, and better control of voltage spikes compared to a conventional flyback converter. It is commonly used in various applications, including low-power AC-DC converters, battery charging systems, and power supplies.